Solutions

Plastic Resins for Caps and Closures Application

Growth in the beverage and food industry rapidly drives the demand for polyethylene, polypropylene, and resins for beverage caps and closures.
The trend in beverage packaging is to down-gauge with lightweight and standard short neck closures. The use of lightweight closures is spreading through the beverage industry which is aiming to use less polymer but still retain all the performance characteristics of standard caps and closures. The application typically requires a balance of toughness and stiffness, combined with easy processability, and excellent organoleptic properties, particularly for beverage applications which include, still water, pasteurized water and carbonated soft drinks (CSD).

For Product Segments

Application Solutions

Lightweight Screw Cap

Round closures with female thread that can be screwed onto a bottle.

PushPull / Thumb Up

These are closures requiring a pull or thumb push action to allow the valve to open and water to flow through. High density polyethylene or Polypropylene can be the material for this product

Tethered Screw Cap

Bottle cap designed to remain attached to the bottle. Allows Cap to return to recycling system

Lightweight Screw Cap

Round closures with female thread that can be screwed onto a bottle.

Tethered Screw Cap

Bottle cap designed to remain attached to the bottle. Allows Cap to return to recycling system

Lightweight Screw Cap

Round closures with female thread that can be screwed onto a bottle.

Tethered Screw Cap

Bottle cap designed to remain attached to the bottle. Allows Cap to return to recycling system.

Carton and Spout Cap

Closures which consist of several parts where by at least one part is integrated to the opening of the container and act as the orifice of such container.

Hinge Closure

These closures connect to the collar via a linkage or joint and open by a swinging mechanism. Low-density polyethylene, Linear low-density polyethylene or Polypropylene can be the material for this product

Lid Cap

Closures by which a single piece is used to close the container opening by latching on to the neck ring of the container.

Push-on Closure

Closures requiring push action to seal container’s opening and pull to completely remove the closure from the container.

Tap

These are closures with a system by which an action on a lever will open a valve and allow water to flow through. High density polyethylene or Polypropylene can be the material for this product

Dispensing (Disc-Top & Pumps)

Closure with a system by which a push down action will either dispense the liquid from the container or reveal the opening orifice.

Gallon Cap

Round closures for bulk container with female thread that can be screwed onto a bottle.

Spout Cap

Closures which consist of several parts where by at least one part is integrated to the opening of the container and act as the orifice of such container.

Trigger Aerosol Spray

These closures have an opening that emits a mist of the product’s liquid. Polypropylene can be the material for this product