Solutions

Large Blow Molding Application

Large blow molding HDPE grades are typically served for producing large containers for several industrial segments, such as, for food ingredients, chemicals, fulid solvents, and others. The market for HDPE large blow-molded products uses machines that provide high efficiency and good processability. Therefore HDPE large blow-molded products require a balance of easy processing and good mechanical strength to enhance the combination of productivity, cost-effectiveness, strength and stiffness performance. GC’s large blow molding product portfolio offers a comprehensive range of grades to meet a wide variety of high performance requirements.

For Product Segments

Application Solutions

Agrichemical Spray Tank

Agrichemical spray tank can be served for both pesticide and insecticide containers.

Drums <200 L.

Drum type without handles is classified into 2 types depending on the nature of the lid. (1) Open head type (2) L-ring or Tight head type: this type

Jerry Cans

Jerry Cans product is a rectangular shape container that having a handle for the purposes of easy transportation and pouring the liquid inside the tank. For instances, the liquid substances are chemicals, food, or water. The Jerry Cans has a lid specifical

IBC tanks for 820 - 1,250 L

Intermediate bulk container (IBC) also known as IBC tote, IBC tank or pallet tank are reusable purposed cubic-container. Multi-use industrial grade containers are engneered for mass handling, tranport, and storage of either liquids, semi-solids, pastes, o

Drums ≥ 200 L (L-Ring or Tight head)

These types of Drums ≥ 200 L have L-Ring or Tight head lid type and volume-capacity of 200 to 235 liters. Two small lids located at the drum top with narrow

Drums ≥ 200 L (Open head)

These types of Drums ≥ 200 L have open head lid type and volume-capacity of 200 to 235 liters.

Water Tanks 500 – 2,000 L.

This kind of tanks is a huge plastic bag for containing water or liquid ranging from 500 to 2,000 liters in size. The water tank is normally designed in the cyclendrical shape (circle crosssention) and will be located on the floor where its lid is on the t

Floating Solar Pontoon

Installations of floating solar panel are popular in many countries where high population density and limited space are concerned. The plastic pontoons are designificated to have enough buoyancy to support the weight of the solar panels and other equipment

Main Float

Main float is a primary float for installation of solar cell panal.

Secondary Float

Secondary float is used for arranging the main float in the line and interfacing the floats together to create pathway.

InnoPlus Product International Standard Compliances

International Standard Compliances by GRADE

InnoPlus HDPE Product

International Standard Compliances by GRADE

FAQ

Q : Drawdown by its own weight

A :- Lower processing temperature
- Increase the parison extrusion speed
- Close mold faster
- Use resin with low Melt Flow Index

Q : Improper position of die pin

A : Adjust the position of die pin follow with product