For Product Segments
Planting Tray
Polymer Type
HDPE
InnoPlus
MFR = 3.7 g/10 min and density = 0.961 g/cm3. It is injection grade with narrow molecular weight distribution (MWD) result for good impact strength. Moreover, this grade is UV stabilizer added that give the excellent UV resistance for outdoor applications.
MFR = 4 g/10 min and density = 0.960 g/cm3. It is injection grade with very narrow molecular weight distribution (MWD) result for good impact and mechanical strength, high shrinkage resistance. Moreover, this grade is UV stabilizer added that give the excellent UV resistance for outdoor applications.
MFR = 6 g/10 min and density = 0.962 g/cm3. It is injection grade with narrow molecular weight distribution (MWD) result for good impact strength. Moreover, this grade is UV stabilizer added that give the excellent UV resistance for outdoor applications.
MFR = 7 g/10 min and density = 0.964 g/cm3. It is injection grade with very narrow molecular weight distribution (MWD) result for good impact and mechanical strength, high shrinkage resistance. Moreover, this grade is UV stabilizer added that give the excellent UV resistance for outdoor applications.
PS
DIAREX
H350E is High impact Polystyrene with a balance of toughness, stiffness, flow and heat resistance. This grade is suitable for all kinds of extrusion and thermoformed.